Filter
Top Products
16
Defi nitely one
to take on board.
Indispensable for applications on the water: achieve great results in
boat building and restoration with the FEIN M
ULTIMASTER. Thanks
to its high cutting performance, the M
ULTIMASTER works perfectly
with wood, fi berglass, carbon fi ber- reinforced plastic and virtually
all other relevant materials, eliminating manual work and improvised
solutions. Great for renovating teak decks!
BOAT BUILDING
The round HSS saw blades are
excellent for sawing work on
fibreglass and carbon fi berglass
reinforced plastic hulls. Make
perfectly clean cuts (0.5 mm
wide) without any cracking or
damage to the laminate.
Order number
6 35 02 097 02 7
1. Sanding:
Ideal for restoring and
maintaining boats: the FEIN
M
ULTIMASTER sands effortlessly
and precisely into every corner
and on edges.
For accessories, see page 19
under „Sanding“
4. Filing recesses:
The M
INICUT saw blades are
exactly the right size for work-
ing in tight spaces, diffi cult-to-
reach spots or for sawing small
recesses (above ⅜").
Order number
6 39 01 025 06 0 Set
3. Adding fi ttings:
Recesses can be fi led precisely
to shape with the M
INICUT and
File Set.
Order reference
6 39 01 025 06 0 Set
2. Finishing and renovating the deck:
Remove deck sealing materials
quickly and thoroughly with the
cutting blades. The time saving is
80% and more when renovating
teak decks.
For accessories, see page 20
under „Cutting“
5. Repairing the hull / fl oor areas: