Festool TDK 15.6 Drill User Manual


 
3
Technical data
Cordless drill/screwdriver TDK 12 TDK 15.6
Motor voltage 12 V 15.6 V
Idle-running speed • 1. speed 0 – 430 rpm 0 - 450 rpm
• 2. speed 0 – 1400 rpm 0 - 1500 rpm
Max torque • Soft case 20 Nm 25 Nm
• Hard case 28 Nm 36 Nm
Adjustable torque • 1. speed 2 – 7 Nm 2 - 7 Nm
• 2. speed 0.5 – 2.5 Nm 0.5 - 2.5 Nm
Chuck capacity 1.5 – 13 mm 1.5 - 13 mm
Max. drill diameter for metal / wood 14 mm / 25 mm 16 mm / 35 mm
Tool fitting in chuck 1/4 " 1/4 "
Weight with battery pack 2.0 kg (4.4 lbs) 2.3 kg (5.1 lbs)
Charger LC 45
Supply voltage (input) / line frequency 120 V ~ / 60 Hz
Charging voltage (output) 7.2 - 18 V (DC)
Charging current
• Quick charge max. 3 A
• Compensation charge, pulsating app. 0.06 A
Charging time for • NiCd 2.0 Ah app. 45 min
• NiCd 2.4 Ah app. 50 min
• NiMH 3.0 Ah app. 70 min
Battery pack BPS 12 BPS 12 BPS 15.6 BPS 15.6
NiCd 2.4 NiMH 3.0 NiCd 2.4 NiMH 3.0
Order number 492 268 491 821 492 269 491 823
Voltage 12 V 12 V 15.6 V 15.6 V
Capacity 2.4 Ah 3.0 Ah 2.4 Ah 3.0 Ah
Temp. range for charging 5 - 45 °C
Monitoring of charge by means of NTC thermistor
Weight 0.73 kg (1.6 lbs) 0.75 kg (1.7 lbs) 0.90 kg (2.0 lbs) 0.92 kg (2.0 lbs)
Symbols
V volts
A amperes
Hz hertz
W watt
~ alternating current
n
0
no load speed
Class II Construction
rpm revolutions per minute
Intended use
Cordless drills are suitable for drilling metal,
wood, plastics and similar materials, as well as
tightening and screwing in screws (into wood,
up to a diameter of 6 mm).
The LC 45 battery charger is designed for
recharging the battery pack listed.
The user will be liable for damage
due to improper use.
Various dust created by power sanding, sawing, grinding, drilling and other
construction activities contains chemicals known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paints,
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
The risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust masks that are specially designed
to filter out microscopic particles.