Filter
Top Products
Safety
If not used properly this product can be dangerous! This product can cause serious injury to the oper-
ator and others, the warnings and safety instructions must be followed to ensure reasonable safety
and efficiency in using this product. The operator is responsible for following the warning and safety
instructions in this manual and on the product.
Explanation of Symbols on your product
Warning.
Read the user instructions carefully to
make sure you understand all the con-
trols and what they do.
Switch off! Remove plug from Power
Pack before adjusting, cleaning or if
cable is damaged.
Do not use in the rain or leave the prod-
uct outdoors while raining.
The use of eye protection is recommend-
ed.
Warning:- This product has not been designed to
provide protection from electric shock in the event
of contact with overhead electric lines.
General
1. Never allow children or people unfamiliar with
these instructions to use the product. Local
regulations may restrict the age of the operator.
2. Only use the product in the manner and for the
functions described in these instructions.
3. Never operate the product when you are tired,
ill or under the influence of alcohol, drugs or
medicine.
4. The operator or user is responsible for acci-
dents or hazards occurring to other people or
their property.
5.
This product has not been designed to provide
protection from electric shock in the event of
contact with overhead electric lines.
Preparation
1. Always wear suitable clothing, gloves, and stout
shoes. The use of safety glasses is recommend-
ed. Do not wear loose clothing or jewellery which
can be caught in moving parts.
2. Thoroughly inspect the area where the product
is to be used and remove all wires and other foreign
objects.
3. Before using the machine and after any impact,
check for signs of wear or damage and repair
as necessary.
4. Never attempt to use an incomplete product or
one with an unauthorised modification.
Use
1. Use the product only in daylight or good artifi-
cial light.
2. Avoid operating your product on a wet hedge,
where feasible.
3. Know how to stop the product quickly in an
emergency.
4. Remove plug from Power Pack befor
e passing
product to another person.
5. Avoid operating while people especially children
are nearby.
6. Whilst using the product always be sure of a
safe and secure operating position.
7. Keep hands and feet away from the cutting
means at all times and especially when switch-
ing on the motor.
8. Do not use stepladders whilst operating the
product.
9. Remove the plug from the Power Pack :-
- before leaving the product unattended for any
period;
- before clearing a blockage;
- before checking, cleaning or working on the
appliance;
- if you hit an object. Do not use your product
until you are sure that the entire product is in a
safe operating condition;
- if the product starts to vibrate abnormally.
Check immediately. Excessive vibration can
cause injury.
- before passing to another person.
Maintenance and storage
1. Keep all nuts, bolts and screws secure to be
sure the product is in safe working condition.
2. Replace worn or damaged parts for safety.
3. Be careful during adjustment of the product to
prevent entrapment of the fingers between
moving blades and fixed parts of the machine.
4. After use the product should be stored using
the blade cover provided.