Filter
Top Products
7 Solutions When the Card Cannot be Connected to Network 67
E
• For PG-1892(L)
- When ACT/LNK LED does not light/blink.
• Check that the driver is installed.
• Check the connection with switch and hub.
• Use another port of switch and hub.
• Network may be in the status of inactive transmission. Try to log in from the
other line.
• For PG-2861 (L)
- When ACT/LNK A/B LED does not light/blink.
• Check that the driver is installed.
• Check the connection with switch and hub.
• Use another port of switch and hub.
• Network may be in the status of inactive transmission. Try to log in from the
other line.
LED LED status LAN card status
❑ACT/LNK
Lights in green Links with switch and hub are correctly established.
Blinks in green Transmitting/Receiving data.
❑10=OFF
100=GRN
1000=ORG
Lights in amber Card is operating at 1000Mbps speed.
Lights in green Card is operating at 100Mbps speed.
Off Card is operating at 10Mbps speed.
Blinks in amber
LED for the card is blinking with [Identify Adapter...] of
"Intel
®
PROSet".
LED type LED status LAN card status
❑ACT/LNK A,
ACT/LNK B
Lights in green Links with switch and hub are correctly established.
Blinks in green Transmitting/Receiving data.
❑10=OFF
100=GRN
1000=ORG
Lights in amber Card is operating at 1000Mbps speed.
Lights in green Card is operating at 100Mbps speed.
Off Card is operating at 10Mbps speed.
Blinks in green
LED for the card is blinking with [Identify Adapter...] of
"Intel
®
PROSet".
ACT/LNK
10=OFF
100=GRN
1000=ORG
ACT/LNK A
ACT/LNK B
10=OFF
100=GRN
1000=ORG