GarrettCom FT14 Welding System User Manual


 
FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04)
26
www GarrettCom com
..
specific to the “14”-series, and do not permit other models).
A typical installation of the model MC14-TRAY, 19” rack-mount tray will hold a few
(often three to eight) 14-series Media Converters, with their power supplies plugged into
power strips (not included) in the rear area of the tray. Metal mounting screws in the
bottom-front hold the Media Converters firmly in place. The beveled-top edge of the
units permits the LEDs of each unit to be viewed for operational status, even when the
units are very close together.
3.3 MC14-TR+PS9 & MC14-TR+PS9X2 for Rack Mounting Media Converters
The MC14-TR+ PS9 and MC14-TR+PS9X2 are another option available for
Rack Mounting the mix-match of 10Mbps and 100Mbps Media Converters together in
19” rack-mount tray. These models comes with built-in common universal AC power
supply rated at 55 watts at 50°C ambient, 9VDC output, and supporting up to 10 MC for