English
7 1⁄4” Circular Saw
Operator’s Manual GCS100
Line-of-Cut Indicators
Installing the Rip Guide
CAUTION:
To avoid personal injury and damage to the work piece, extend the rip guide through all slots in the base.
Starting and Stopping the Saw
WARNING:
The blade coming into contact with the work piece before reaching full speed, could cause your saw to KICKBACK
towards you resulting in serious personal injury.
Operating the Saw
CAUTION:
To make sawing easier and safer, be sure to move the tool forward in a straight line gently. Forcing or twisting the tool
will result in overheating the motor and dangerous KICKBACK, possibly causing severe personal injury.
DANGER:
If, while operating the saw, the cord hangs up on the work piece or other object during a cut, release the switch
trigger immediately. Unplug the saw and reposition the cord to prevent it from hanging up again.