Genesis Advanced Technologies GTS10S Saw User Manual


  Open as PDF
of 17
 
FIG. 19
FIG. 18
English
10" Table Saw
Operator’s Manual GTS10S
Non-Through Cutting


WARNING:Never feed work piece through with your hands when making non-through cut, such as rabbets
or dados. Always use push stick and push block. Failure to do so can result in serious personal injury
IMPORTANT:The table saw is a highly versatile tool, capable of a wide range of applications which cannot be
covered in this manual. Do Not attempt to perform cuts not covered in this manual unless you are thoroughly
familiar with procedures and featuring. Visit your local library for books on woodworking techniques
MAINTENANCE
To Remove or Change the Blade
WARNING:Always unplug the saw from power source before maintenance to avoid risk of serious personal
injury.
To remove the blade:






To install the blade, reverse the procedure.
IMPORTANT:Blade rotation is counter-clockwise when seeing from the right side of the saw. Make sure the
rotation direction mark on the blade matches with that.
Lubrication

 previous next