Genesis Advanced Technologies GTS10S Saw User Manual


  Open as PDF
of 17
 
English
10" Table Saw
Operator’s Manual GTS10S
•Alwaysusebladeguard,splitterandanti-kickbackpawlsonallthroughcuttingoperations.

•Alwayssecuretheworkpieceagainstripfenceormitergauge.
•Alwaysusepushstickforrippingnarrowstock. 

•Nevercutfreehand,

•Standtothesideofthebladeandworkpiece.

•Neverreachbehindbladewhenthesawbladeisrotating.
•Moveripfenceoutofthewaywhencrosscutting.
•Keepsawbladecleanandsharp.
•FeedtheworkpiecethroughAGAINSTtherotationoftheblade.


Use support for the sides and back of the saw table when cutting wide or long work piece.
•Nevercutonethanoneworkpieceatatime.

•Keepingripfenceparalleltothesawbladetoavoidbindingorkickbacks
•Neverpulltheworkthroughthespinningblade.

•Donotripaworkpiecethatistwistedorwarpedordoesnothaveastraightedgetoguidealong
the fence.
•Nevermakethroughcutsnarrowerthan½”.

•Neverattempttofreeastalledsawbladewithoutturningoffthesawandunpluggingthesawfrom
the power source.
•Avoidcuttingnailsorothermetalpieces.
•Alwaysturnthesawoffbeforeunpluggingthesawfrompowersource

•Useonlyaccessoriesratedforthespeedrecommendedonthetoolwarninglabelorhigher.


•Savetheseinstructions.
WARNING:
USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR OTHER AIRBORNE PARTICLES, INCLUDING WOOD
DUST, CRYSTALLINE SILICA DUST AND ASBESTOS. Direct particles away from face and body. Always operate
tool in a well-ventilated area and provide for proper dust removal. Use dust collection system wherever possible.
Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung
disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with the dust. Allowing dust to
get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly
fitting NIOSH/OSHA approved respiratory protection appropriate for dust exposure, and wash exposed areas with
soap and water.
SAVE THESE INSTRUCTIONS
 previous next