Filter
Top Products
3
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Voltage: 230–240 Vac ~ 50 Hz
Nominal battery voltage: 18V
Strokes per minute: 0–2700 SPM
Batteries: 2 x 1.2Ah
Charging Time: 1 Hour
Blade stroke: 22mm
Weight: 3.6kg
Common blade types (blades not supplied):
150mm long, 6 TPI For fast smooth cuts in woods,
masonite, plastics, hard composite
board and all plunge cutting.
Keyhole blade shape permits
cutting in hard to reach places.
230mm long, 6 TPI For fast, smooth, deep cuts
through thick wood, plastic,
composition board and hardboard.
300mm long, 6 TPI For rough cuts in wood.
100mm long, 24 TPI High speed steel blade for cutting
ferrous materials.
Dear Customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information:
Please phone our Help Line for an immediate response. The
appropriate number is given on the rear page of this manual.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate, and,
with proper care, it will give you many years of dependable
service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make you
job faster and easier. Safety performance and dependability
have been given top priority to the development of this tool,
making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to the
local recycling centre and disposed of in an
environmentally safe way.