Filter
Top Products
3
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or instruc-
tions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards
for electromagnetic compatibility.
Read and understand instruction manual before
using this product
Specifications
Voltage: 230–240 V ~ 50 Hz
Motor: 250W (1/3HP) single phase
Chuck capacity: 13mm (1/2”)
Spindle axis to column distance:
104mm
Max. spindle travel: . 50mm
Max. spindle nose to
table distance: 15mm
Max. spindle nose to
base distance: 290mm
Range of
spindle speeds: 500, 890,1400,
1900, 2500/min
Overall dimensions H x W x D): 435mm x 220mm x 350mm
Net weight: . 17kg
This tool is an earthed appliance.
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way
.