Filter
Top Products
6
16. Make sure all clamps and locks are firmly tightened
before drilling.
17. Securely lock the head and table support to the column,
and the table to the table support before operating your
drill press.
18. Never turn your drill press on before clearing the table of
all objects (tools, scraps of wood etc.)
19. Before starting the operation, jog the motor switch to
make sure the drill bit does not wobble or vibrate.
20. Let the spindle reach full speed before starting to drill. If
your drill press makes an unfamiliar noise or if it vibrated
excessively, stop immediately, turn the drill press off and
unplug it. Do not restart until the problem is corrected.
21. Do not perform layout assembly or setup work on the
table while the drill press is in operation.
22. Do not exceed the rpm stated on the bit or accessory.
See the instructions that come with the accessory.
23. When drilling large diameter holes, clamp the workpiece
firmly to the table. Otherwise, the bit may grab and spin
the workpiece at high speed. Do not use fly cutters or
multiple-part cutters, as they can come apart or become
unbalanced in use.
24. Make sure the spindle has come to a complete stop
before touching the workpiece.
25. To avoid injury from accidental starting, always turn the
switch off and unplug the drill press before installing
or removing any accessory attachment or making any
adjustment.
CAUTION! Do not expose to rain or use in damp locations.
WARNING! For your own safety read instruction manual
before operating drill press. Wear eye protection, do not
wear gloves, necktie or loose clothing, clamp workpiece or
brace against column to prevent rotation, use recommended
speed for drill accessory and workpiece material.