Filter
Top Products
7
Know your product
The sander is designed for sanding wood, metal, plastic
and similar materials. It is a finishing sander and should
be used only when giving a surface a final sanding. As the
base is reasonably small, the sander is suited for accessing
tight corners that larger sanders are unable to reach.
1. On/Off switch
2. Palm-grip handle
3. Platen
4. Dust extraction port
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Assembly
The GMC KAT150A Sand Kat Detail Sander is packed,
fully assembled, ready for use. You need only to add the
appropriate sanding sheet.
4
3
2
1