Filter
Top Products
Assembly
The Dust Extractor is shipped partly disassembled.
Casters
1. Place the base plate
upside down and
attach the four
casters.
Support pole
1. Turn the base plate
the right way round
and attach the
support pole. The
right-angle plate
needs to face the
shortest end of the
base.
Fan housing
1. Attach the fan
housing to the
support pole.
Collector
1. With the gasket in
place, attach the
collector to the fan
housing.
Collector support
brackets
1. Fix a bracket to the
base plate and then
to the collector.
2. Repeat for the other
bracket.
Bag support
1. Attach the bag
support to the
collector.
Bags
1. Fit both bags over
the collector.
2. Use the belt on each
bag to secure the bag
in place.
Anti-vibration
bolts
1. Loosen the lock nut
on each anti-vibration
bolt.
2. Adjust the two bolts
so that the heads are
flush with the bottom
of the fan housing.
3. Retighten the lock nuts.
7