Filter
Top Products
11
3. Insert the new brush
assembly and replace the
brush cap, tightening it with
a screwdriver. Replace the
side clip (9).
4. Repeat the operation for the
second brush on the other
side of the tool.
Note. After replacing the
brushes, you may notice sparking and a burning smell
when the tool is first used. This is not a hazard. The
excessive sparking and the burning smell will both soon
subside as the new brushes bed in.
Power cord maintenance
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s agent,
or a power tool repair centre in order to avoid a
safety hazard.