Filter
Top Products
6
will cause the work piece to “climb” up on the bit
pulling the work piece and possibly your hands into the
rotating bit.
• Guide the work piece by the fence to maintain control.
Do not place material between the router bit and fence
while routing the edge. This will cause the material to
become wedged, making kickback possible.
• Use push sticks, vertical and horizontally mounted
feather boards and other jigs to hold the work piece.
Push sticks, feather boards and jigs eliminate the need
to hold the work piece near the spinning bit.
• Do not use the table as a work bench or work surface.
Using it for purposes other than routing may cause
damage and make it unsafe to use for routing. Do not
stand on the table.
Assembly
This router table is shipped disassembled and the parts
have to be assembled prior to use.