Accessories
42
Extension Tip Kits
Kits include extension, flat tip seal and round tip seal, cleanout drill bit, and instructions.
Requires 248020 Extension Tip Air Cap Kit (order separately).
* Measured with less than 8 in. (203 mm) drop in stream center at 1200 psi (8.4 MPa, 84 bar) static pressure.
Extension Tip Seal Kits
Kits include 5 seals.
Extension Tip Air Cap Kit
248020
Includes air cap for use with extension tip kits
248010-248017.
Flat Pattern Stud Wall Kit
249421
To spray high-flow, flat patterns. For use with flat mix
chambers only: AF2929, AF4242, AF5252. Includes
adapter parts and cleanout tool.
Hose Adapter Kits
246944
To connect non-Graco gun to Graco heated hose.
248029
To connect Graco Fusion gun to non-Graco D-gun hose
set.
246945
To connect Graco Fusion gun to non-Graco heated
hose.
Kit Part
No.
Hole Diameter x Length,
in. (mm)
Recommended
Mix Chambers
Spray
Distance,
ft (m) *
Pattern
Diameter,
in. (mm) *
248010 .042 x 0.50 (1.06 x 12.7) AR2020/AF2929 15 (4.57) 10 (254)
248011 .052 x 0.50 (1.32 x 12.7) AR2929/AF2929 12 (3.66) 10 (254)
248012 .060 x 0.50 (1.52 x 12.7) AR4242/AF4242 12 (3.66) 12 (305)
248013 .070 x 0.50 (1.78 x 12.7) AR5252/AF5252 8 (2.44) 20 (508)
248014 .042 x 1.0 (1.06 x 25.4) AR2020/AF2929 15 (4.57) 10 (254)
248015 .052 x 1.0 (1.32 x 25.4) AR2929/AF2929 12 (3.66) 8 (203)
248016 .060 x 1.0 (1.52 x 25.4) AR4242/AF4242 12 (3.66) 8 (203)
248017 .070 x 1.0 (1.78 x 25.4) AR5252/AF5252 8 (2.44) 8 (203)
Kit Part No. Description
248018 Flat Extension Tip Seal Kit
248019 Round Extension Tip Seal Kit
• Flat pattern mix chamber not included. Order
separately.
• Optional tip FTM762 available for lower flow
and smaller pattern application.