Filter
Top Products
Installation
310649C 9
Installation
Mounting gun to rod
Mounting gun to stationary
support or robot arm
1. To mount the gun on a 1/2 in. diameter rod, insert
the bar (A) through the hole in the gun body as
shown.
2. Secure the gun to the bar by tightening 1/4 in. - 20
mounting screws.
To mount gun to stationary support or robot arm, see
mounting hole dimensions page 20.
ti4750a
Two .128 in.
alignment
pin holes
Two 1/4 -
20 unc
holes
ti4751b