Air Flow Sensor Replacement
26 310645S
Air Flow Sensor Replacement
For 120 V sprayer use Sensor Replacement Kit 287326.
For 230 V sprayer use Sensor Replacement Kit 287345.
If you are just replacing the sensor, you do not have to
remove the motor first.
Disassembly
First read and follow instructions in the Before perform-
ing any service on sprayer section, page 9.
Then remove hopper, front and back covers, page 9.
Remove hose extension and RotoFlex HD Pump
assembly from frame, page 11.
1. Disconnect all
wire connec-
tions.
2. Rotate counter-clockwise
to remove sensor from
manifold.
Reassembly
1. Rotate new sensor
from kit clockwise, all
the way into opening in
Relief Valve housing.
Lightly tighten nut.
2. Reconnect all wires.
3. Replace RotoFlex HD
Pump and hose
extension, page 12.
4. Replace back and
front covers and hop-
per. See Removing
and Replacing Hop-
per, Front and Back
Cover, page 9.
ti4481a
ti4482a
WHITE WIRE
ti4480a
ti4486a
ti4487a
WHITE WIRE
ti4488a