Filter
Top Products
Startup
310892F 21
Secondary Menu - Stored Data and WatchDog Pump Protection Modes
8. Press and hold DTS but-
ton until CLEAR ERROR
NO ERROR CODE
scrolls through the dis-
play and then error code
E=00 displays. See
Manual 310893.
9. Short press DTS button
again to move to Watch-
Dog mode. You may
now short press and
do step 10 or long
press do step 11.
10. Short press DTS button
again and SOFTWARE
REV scrolls through dis-
play followed by revision
level; e.g., 02.
11. Press and hold (8 sec-
onds) DTS button to
move to WatchDog Trig-
ger % menu. Continue to
hold DTS button and
WatchDog can be set to
trigger at 30, 40, 50 or
60% of current sprayer
pressure setting.
Release DTS button
when desired % is dis-
played. Default is 50%.
ti6218a
SMARTCONTROL
ti5819a
SMARTCONTROL
ti6221a
SMARTCONTROL
ti5820a
SMARTCONTROL