Filter
Top Products
Setup
14 313888B
Spray Gun (Top Coat Pump)
1. Lock gun trigger safety. Insert seat and OneSeal
™
.
Insert SwitchTip.
2. Screw assembly onto gun. Hand tighten.
3. Trigger gun and spray test pattern. Slowly adjust
pressure to eliminate heavy edges. Use smaller tip
size if pressure adjustment can not eliminate heavy
edges.
4. Hold gun perpendicular, 10-12 in. (25-30 cm) from
surface. Spray back and forth. Use strokes over-
lapped by 50%. Start gun movement before trigger-
ing gun and release trigger before stopping gun
movement.
SwitchTip
ti5800a
Seat
One seal
ti13131a
ti5801a
heavy
edges
ti5823a
ti5824a