Filter
Top Products
Clutch Housing
20 3A0243A
Engine
Removal
NOTE: All service to the engine must be performed by
an authorized Honda dealer.
1. Remove Pinion Assembly/Clutch Arma-
ture/Clamp and Clutch Housing, as instructed on
pages 17, and 18.
2. Disconnect all necessary wiring.
3. Remove two locknuts (17) and screws (16) from
base of engine.
4. Lift engine carefully and place on work bench.
Installation
1. Lift engine carefully and place on cart.
2. Install two screws (16) in base of engine and secure
with lock nuts (17). Torque to 26 ft-lb (22.6 N·m).
3. Connect all necessary wiring.
4. Install Pinion Assembly/Clutch Armature/Clamp
and Clutch Housing, as instructed on pages 17,
and 18.
1
2
3
1
2
To the field
To the engine
3
To gallon counter
4
To ground
4
Green
ti5485b
Bottom View
5900/7900
2
Bottom View
3900
17
16
ti5487a