Filter
Top Products
Displacement Pump
24 3A0243A
f. Place u-bolt on pump door protrusion
8. Ratchet pump door forward.
9. Open pump door.
10. Pull out pump pin and place in pin holder
Installation
1. Adjust piston rod with pin holder to pull out piston
rod. Tap piston rod on hard surface to push in piston
rod.
2. Push pump collar flush with bearing housing ledge
to be able to close pump door.
3. Slide pump into connecting rod. Push pump pin until
it is fully retained.
NOTE: Pin will snap into position.
4. Close pump door and rotate latch into position. Do
not tighten latch.
ti6375a
ti14905a
ti14906a
ti6325a
ti5492a
ti6378a
ti14907a
ti14908a
ti6313a