Filter
Top Products
Spraying
312473B 11
Spraying
1. Adjust fluid flow using the pump air regulator or the
fluid pressure regulator.
2. Adjust fluid pressure so stream from gun travels 6–8
in. straight before falling off.
3. Adjust the gun air regulator to achieve proper spray
gun atomization.
4. Test the spray pattern. Read the fluid manufacturer’s
recommendations. Adjust as necessary.
Shutdown
1. Flush. See Flush page 9.
2. Relieve pressure. See Typical Installation, page 7.
TI10836A
TI10837A
+
+
6 in. to 8 in.
(152 mm to 203 mm)
TI10838A
TI10836A
+
TI10833A
TI10839A