Filter
Top Products
308131 37
Accessories
FLUID LINE ACCESSORIES
Fluid Hose Assemblies (Nylon)
225 psi (14 bar, 1.4 MPa) Maximum Working Pressure
FM Approved; 1/4 in. (6.35 mm) ID, 3/8 npsm(fbe)
215637 25 ft (8 m)
215638 50 ft (15 m)
Fluid Hose Assemblies (Nylon)
500 psi (35 bar, 3.5 MPa) Maximum Working Pressure
FM Approved; 1/4 in. (6.35 mm) ID, 3/8 npsm(fbe)
216076 25 ft (8 m)
216077 50 ft (15 m)
216079 100 ft (30 m)
Fluid Shutoff/Drain Valve
500 psi (35 bar, 3.5 MPa) Maximum Working Pressure
For turning fluid off or on to the gun and for relieving
fluid line pressure at the pump
208630 1/2 npt(m) x 3/8 npt(f); carbon steel and
PTFE; for non-corrosive fluids
MISCELLANEOUS ACCESSORIES
Grounding Clamp and Wire 222011
12 ga, 25 ft (7.6 m) wire
Megohmmeter 241079
500 Volt output; 0.01–2000 megohms.
Not for use in Hazardous areas.
Paint Resistance Meter 722886
Used with 722860 Paint Probe to measure resistance
of paint. Not for use in Hazardous areas.
Paint Probe 722860
Used with 722886 Paint Resistance Meter to measure
resistance of paint. Not for use in Hazardous areas.
Safety Warning Signs
FM Approved; Available at no charge from Graco.
Must be ordered separately.
180060 Warning Sign (English)
GUN ACCESSORIES
Gun Washer Kit Part No. 236681
For use with a Graco Gun Washer to clean the PRO
3500 and PRO 4500 Electrostatic Spray Guns.
Snap Ring Pliers 110090
For removing the ES ON-OFF Valve Retaining Ring
(item 47 in Parts List).
ES ON/OFF Valve Conversion Kit 223976
FM Approved; Converts the ES ON/OFF Valve to a
constant on setting. A ball valve is included for com-
plete air shut-off at the gun.
Push-Pull Pattern Adjustment Valve 224720
FM Approved; Pattern adjustment valve that allows
quick adjustment of the pattern width between two
adjustable settings.
Four-Finger Trigger Conversion Kit 224884
FM Approved; Converts gun from a two-finger to a
four-finger trigger.
Gun Power Supply with RF Transmitter 224100
Power supply with transmitter capability for spraying
voltage readout (SVR).