Filter
Top Products
30940812
WatchDogt Pump Protection System
Pump stops automatically when material pail is empty.
1. Do Startup.
2. Press and hold DTS button, release
when ON is displayed.
Note: GAL (or LITER) flashes while pump
protection system is active.
EMPTY displays and the pump stops when pump
protection system detects an empty material pail.
3. Turn pump switch OFF to resume normal operation.
Increase pressure to more than
2000 psi (140 bar, 14 MPa).
Note: Instructions to automatically activate the
WatchDog pump protection system every time
you spray are on page 14.
Press and hold (5 seconds) DTS button to change
pressure units (psi, bar, MPa), to desired units.
Pressure:
Volume:
Press and hold (5 seconds) DTS button to
change volume units (GAL, LITERX10).
Change Display Units:
To Activate: