Filter
Top Products
Repair
16 313889B
9. Place pinion assembly on bench with rotor side up.
10. Apply thread sealant to screws. Install four screws
(28) and lock washers (24). Alternately torque
screws to 125 ± 10 in-lb (14 ± 1.1 N•m) until rotor is
secure. Use threaded holes to hold rotor.
11. Install pinion assembly (29) with four screws (36)
and washers (37).
12. Connect clutch cable connectors to inside of pres-
sure control.
28
24
ti5481a
ti13217a
ti13356a