Filter
Top Products
3084386
Installation/Operation
System Requirements
WARNING
INJECTION HAZARD
Keep the wallet-sized warning card,
provided with this gun, with the operator
at all times. The card contains important
treatment information should an injection injury
occur. Additional cards are available at no charge
from Graco Inc.
WARNING
The equipment must have a bleed-type master air
valve (pneumatic pumps only) and a fluid drain
valve. These accessories help reduce the risk of
serious injury from injection, splashing in the eyes
or on the skin, or moving parts, when adjusting or
repairing the pump or gun.
1. The bleed-type master air valve relieves air
trapped between this valve and the pneumatic
pump after the air regulator is shut off. Trapped air
can cause the pump to cycle unexpectedly.
2. The fluid drain valve assists in relieving fluid pres-
sure in the displacement pump, hose and gun;
triggering the gun to relieve pressure may not be
sufficient.
Ground the System
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding could cause static
sparking, which could cause a fire or
explosion. To reduce the risk of property
damage or serious injury, ground the
pump and all other equipment used or
located in the spray area. Also read FIRE OR
EXPLOSION HAZARD on page 4.
Check your local electrical code for detailed grounding
instructions for your area and type of equipment. Also
follow the grounding instructions provided in your
pump or sprayer manual. The gun obtains grounding
through connection to a properly grounded fluid hose
and pump or sprayer.
How to Use the Gun Trigger Safety
1. To lock the gun trigger safety, turn the safety to a
right angle with the gun body. See Fig. 1.
2. To unlock the gun trigger safety, push the safety
out and turn it parallel with the gun body. See
Fig. 1.
Fig. 1
1
2
Gun trigger safety shown locked
Gun trigger safety shown unlocked
1
2
03966