Filter
Top Products
7GC-1388F
Rotate trigger lock
to stop the trigger
from being activated.
Hose Attachment
1. Engage the trigger lock.
2. Attach the (black p/n 21694-25) material hose to
the material inlet tting on the back of the gun.
3. Attach the (yellow p/n 236) solvent line to the solvent
inlet tting on the back of the gun.
4. Attach the (stainless steel p/n 20190-00) catalyst hose
to the catalyst inlet tting on the back of the gun.
5. If the optional berglass roving chopper is being used,
attach the “red” chopper air line to the chopper air
inlet tting on the back of the gun.
Set-Up