Filter
Top Products
3089722
Table of Contents
W arnings 2......................................
Component Identification 5........................
Setup 5.........................................
Flushing 8.......................................
Operation 10....................................
Maintenance 12..................................
T roubleshooting 13...............................
Displacement Pump Service 16....................
Sprayer Parts Drawing 18.........................
Spraye r Parts List 34.............................
Accessories 37..................................
Technical Data 37................................
Graco Warranty 38...............................
Graco Information 38.............................
Symbols
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
equipment if you do not follow the instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
D This equipment is for professional use only.
D Read all instruction manuals, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
D Do not alter or modify this equipment. Use only genuine Graco parts.
D Check equipment daily. Repair or replace worn or damaged parts immediately.
D Do not exceed the maximum working pressure of th e lowest rated system component. Refer to the
Technical Data on page 37 for the maximum working pressure of this equipment.
D Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data section of all equipment manuals. Read the fluid and solvent manufacture r’s warnings.
D Do not use hoses to pull equipment.
D Route hoses away from traf fic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 82_C (180_F) or below --40_C(--40_F).
D Do not lift pressurized equipment.
D Comply with all applicable local, state, and national fire, electrical, and safety regulations.
D W ear hearing protection when operating this equipment.
D Do not use 1,1,1--trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or
fluids containing such solvents in pressu rized aluminum equipment. Such use could result in a
chemical reaction, with the possibility of explosion.