Filter
Top Products
13310548
Oil/Filter Change
Removal
1. Fig. 6. Place drip pan or rags under spraye r to
catch hydraulic oil that drains out.
2. Remove drain plug (40). Allow hydraulic oil to
drain.
3. Unscrew filter (47) slowly -- oil runs into groove
and drains out rear.
Installation
1. Install drain plug (40) and oil filter (47). T ighten oil
filter 3/4 turn after gasket contacts base.
2. Fill with four quarts of Graco hydraulic oil 169236
(5 gallon/20 liter) or 207428 (1 gallon/3.8 liter)
3. Check oil level.
Fig. 6
ti2271a
47