Filter
Top Products
Fan Replacement
311911C 17
Fan Replacement
FinishPro 390
Removal
1. Relieve pressure, page 7. Disconnect power cord
from outlet.
2. Remove two screws (30) and shroud (29).
3. Remove spring clip (1b) on back of motor.
4. Pull off fan (100).
Installation
1. Slide new fan (1a) in place on back of motor. Be
sure blades of fan face motor as shown.
2. Install spring clip (1b).
3. Replace shroud (29) and two screws (30).
FinishPro 395
1. Relieve pressure, page 7. Disconnect power cord
from outlet.
2. Remove four screws (12) and shroud (23).
3. Remove retaining ring (126) on fan (125).
4. Pull off fan.
Installation
1. Slide new fan (125) on back of motor. Be sure
blades of fan face motor as shown.
2. Install retaining ring (126).
3. Replace shroud (23) and four screws (12).
1b
1a
30
29
ti9269a
12
23
125
126
ti9604a