Filter
Top Products
Motor Replacement
311911C 35
Motor Replacement
See Wiring Diagram, page 36.
FinishPro 395
Removal
1. Relieve pressure, page 7.
2. Remove pump (41); Displacement Pump Replace-
ment, page 13
3. Remove drive housing (42); Drive Housing
Replacement, page 15.
4. Remove screws (12) from cover (50).
5. Disconnect all leads from board (49). Remove
screws (6) and board.
6. Remove screws (47) and control box (48).
7. Remove screws (47) and manifold (15).
8. Remove screws (47) and motor (54) from frame
(59).
Installation
1. Install new motor (54) on frame (59) with screws
(47).
2. Install manifold (15) with screws (47).
3. Install control housing (48) with screws (47).
4. Install board (49) with screws (6). Connect all leads
to board. See wiring diagram for your sprayer model
on page 36.
5. Install drive housing (42); Drive Housing Replace-
ment, page 15.
6. Install pump (41); Displacement Pump Replace-
ment, page 13.
CAUTION
Do not drop gear cluster (44) and (40) when removing
from drive housing (42). Gear cluster may stay
engaged in motor front end bell or drive housing.
48
12
50
49
6
47
15
47
47
54
59
ti9605a