Filter
Top Products
H8151 230V Mini Welder
-11-
General Arc Welding
Operations
Becoming a good welder takes a lot of practice
and experience. If you are a novice, read books
and get help from an experienced welder before
beginning a welding operation.
Practice on scrap metal and expect to spend con
-
siderable time learning the many aspects of good
welding.
Although it is beyond the scope of this manual to
instruct how to weld, here are some general steps
for successful welding:
1. Read and understand this manual and ensure
that all safety instructions are followed.
2. Establish a safe and efficient welding envi-
ronment and ensure that you are properly
protected for the welding operation. Ensure
that there is a working fire extinguisher read
-
ily available.
3. Have an experienced welder stand by to
assist if needed.
4. Select the correct electrode type and size for
your welding project.
5. Choose the correct amperage output and be
aware of the duty cycle for this amperage.
6. Decide which type of weld is correct for your
project and properly prepare the metal.
7. Make sure the welding cables and grounds
are secure.
Note: Insert the welding cable connectors
into the welder output sockets and twist
clockwise until fully secure.
8. Stay aware of the work environment around
you as you weld and ensure that flying sparks
do not start a fire.
9. Look slightly ahead of the arc. Even with
the protection of the welder's hood, looking
directly at the arc can damage your eyes.
10. Listen to the sound of the weld. Each type
of weld has its own distinct sound when it is
progressing correctly.
The above instructions are not intended to be a
complete list of welding steps. To become a good
welder, read books on welding, get help from
experienced welders, and practice.