Filter
Top Products
-8- G1028Z/G1029 Dust Collector
Unpacking Piece Inventory
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.
The G1028Z/G1029 is a
heavy machine, 116/140
lbs. shipping weight.
DO NOT over-exert
yourself while unpack-
ing or moving your
machine – you will need
assistance. Serious per-
sonal injury may occur
if safe moving methods
are not followed.
The Model G1028Z/G1029 Dust Collector is
shipped from the manufacturer in a carefully
packed carton. If you discover the machine is
damaged after you’ve signed for delivery, please
call Customer Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
After all the parts have been removed from the
carton, you should have:
• Collector Body Assembly
• Base
• “Y” Inlet
• Collection/Filter Bags
• Lower Support Brackets (2)
• Casters (4)
• Rubber Gasket
• Upper Support Bracket
• Outlet
• Outlet Hose
• Hose Clamps
• Hex
Bolts
5
⁄16"-18 x
1
⁄2" (36)
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.