Grizzly G0454 Planer User Manual


  Open as PDF
of 72
 


Wood Hardness
        
        

        
      

       

Note: The Janka Hardness Rating is expressed in
pounds of force required to embed a 0.444" steel
ball into the surface of the wood to a depth equal
to half the ball's diameter.
Species
Janka
Hardness
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 15.

Feed Rate
NOTICE
Only change the feed rate when the planer
is running, but DO NOT attempt to change
the feed rate during any cutting operations
or damage to the gearbox will result.


       



   

Figure 16

 


 

 

High
Low
Neutral
Figure 16.
 previous next