Filter
Top Products
6.
7.
8.
Figure 31
Figure 30.
Figure 31.
4.
5.
Figure 30
Figure 32.
Note: For a quick gauge, fold a dollar bill in half
twice (four thicknesses of a dollar bill is approxi-
mately 0.016") and place it between the support
bearing and the blade as shown in Figure 32
9.
10. Steps 49
NOTICE
Whenever changing a blade or adjusting ten-
sion and tracking, the upper and lower blade
support bearings and blade guide bearings
must be properly adjusted before cutting
operations.