Filter
Top Products
-10-
G0472/G0473/G0476 Sandblasters
To assemble the sandblaster:
1. Install the two lamp holders with the two
screws (Figure 1).
2. Connect the electrical wires and install the
electrical box with the screws
(Figure 2).
Figure 2. Light assembly.
3. Install the filter assembly with the screws and
nuts (Figure 3).
G0476 Assembly
5. Install window, hinges, lock latches, and the
knob (Figure 5).
6. Install the chain to the window and cabinet
with the screws and nuts (Figure 6).
Figure 1. Lamp holder.
Figure 5. Hinge and knob assembly.
Figure 8. Light assembly.
Figure 4. Glove installation.
Figure 3. Filter installation.
4. Install the gloves as shown in Figure 4.
Figure 5. Window chain.
Figure 7. Blast gun assembly.
7. Install the bulkhead fitting with gasket. Attach
the air supply hose and suction hose to the
bulkhead fittings and suction pipe with hose
clamps (Figure 7).
8. Plug in the AC/DC adapter (Figure 8).
Gasket
Washer
Bulkhead
Fitting
Washer
Suction
Pipe
Chain