Grizzly G0475 Sander User Manual


 
G0474/G0475 Sandblasters
-5-
7. ONLY ALLOW TRAINED AND PROP-
ERLY SUPERVISED PERSONNEL TO
OPERATE EQUIPMENT. Make sure
operation instructions are safe and clearly
understood.
8. KEEP CHILDREN AND VISITORS AWAY.
Keep all children and visitors a safe dis-
tance from the work area.
9. MAKE WORKSHOP CHILD PROOF. Use
padlocks, master switches, and remove
start switch keys.
10. NEVER LEAVE WHEN MACHINE IS
RUNNING. Turn power OFF and allow all
moving parts to come to a complete stop
before leaving equipment unattended.
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use this equip-
ment in damp, wet locations, or where any
flammable or noxious fumes may exist.
12. KEEP WORK AREA CLEAN AND WELL
LIT. Clutter and dark shadows may cause
accidents.
13. USE A GROUNDED EXTENSION CORD
RATED FOR THE MACHINE AMPERAGE.
Undersized cords overheat and lose power.
Replace extension cords if they become
damaged. DO NOT use extension cords
for 220V equipment.
14.
ALWAYS DISCONNECT FROM POWER
SOURCE BEFORE SERVICING
MACHINERY. Make sure switch is in
OFF
position before reconnecting.
15. MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
16. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.
17. REMOVE ADJUSTING KEYS AND
Safety Instructions for Machinery
WRENCHES. Make a habit of checking for
keys and adjusting wrenches before turn
-
ing equipment
ON.
18. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY. Check
for binding and alignment of parts, broken
parts, part mounting, loose bolts, and any
other conditions that may affect equipment
operation. Repair or replace damaged
parts.
19. USE RECOMMENDED ACCESSORIES.
Refer to the instruction manual for recom
-
mended accessories. The use of improper
accessories may cause risk of injury.
20. DO NOT FORCE MACHINERY. Work
at the speed for which the equipment or
accessory was designed.
21. SECURE WORKPIECE. Use clamps or a
vise to hold the workpiece when practical.
A secured workpiece protects your hands
and frees both hands to operate the equip-
ment.
22. DO NOT OVERREACH. Keep proper foot
-
ing and balance at all times.
23. MANY MACHINES CAN EJECT
THE WORKPIECE TOWARD THE
OPERATOR. Know and avoid conditions
that cause the workpiece to "kickback."
24. ALWAYS LOCK MOBILE BASES
(IF USED) BEFORE OPERATING
MACHINERY.
25. BE AWARE THAT CERTAIN DUST MAY
CAUSE AN ALLERGIC REACTION in
people and animals, especially when
exposed to fine dust. Make sure you know
what type of dust you will be exposed to
and always wear an approved respirator.