New Blade Guard
MODEL G0502
18" CUT-OFF SAW
MANUAL UPDATE
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
If you have questions, contact Tech Support at (570) 546-9663 or by email at
techsupport@grizzly.com.
To prepare the blade guard for operation:
1.
2.
Note: The two guard stakes above the actua-
tor bracket must be left high enough to not
interfere with the actuator during operation.
Operation
To operate the G0502:
1. Steps 1–3Page 25
2.
ON
3.
4.