Grizzly G0613/G0614 Saw User Manual


 
G0613/14 Swivel Mast Metal Cutting Bandsaw
-15-
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss
-
ing.
Inventory
After all the parts have been removed from the
crate, you should have the following accesso
-
ries:
Shipping Crate: (Figure
6) Qty
A. Splash tray ................................................. 1
B. Handle ........................................................ 1
C. Work Stop Arm ........................................... 1
D. Work Stop Lock Lever ................................ 1
E. Work Stop Rod ........................................... 1
F. Hardware .................................................... 1
—Flat Washer 8mm ...................................
8
—Hex Bolt M8-1.25 X 16 ............................
8
—Flat Washer 10mm .................................
4
—Hex Bolt M10-1.5 X 35 ............................
4
—Hex Nut M8-1.25 ....................................
8
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi
-
ency, replacements can be obtained at your local
hardware store.
Figure 6. G0613/14 inventory.
A
B
C
D
F
E