Filter
Top Products
-22-
G0613/14 Swivel Mast Metal Cutting Bandsaw
Figure 17. Vise clamping options.
5. Use the chart shown in Figure 17 as a guide
to quickly position the workpiece between
the vise jaws correctly and to avoid slipping
during a cut. DO NOT CUT STEEL THAT
IS STACKED OR BUNDLED. One or more
workpieces will slip and damage the saw
blade.
Always turn the saw OFF and allow the blade
to come to a complete stop before using the
vise! Failure to follow this caution may lead
to injury.