Grizzly G0652 Saw User Manual


 


Blade Tilt/Bevel Cuts

Page 51
        

     
Figure 44

Figure 44

    



Page
44    


         
      

DO NOT make a through-cut with a dado
blade. Dado blades are not designed for
through cuts. Failure to follow this warning
could result in serious personal injury.
Dado operations require proper procedures
to avoid serious injury. Extra care must be
taken to prevent kickback when using dado
blades. Any movement of the workpiece
away from the fence will cause kickback. Be
certain that stock is flat and straight. Failure
to follow these warnings could result in
serious personal injury.
Dado Cutting
Using a Stacked or Wobble Dado
Blade
1. 
2. 

3.       
   

4. 
5. 

      

The danger of kickback increases relative
to the depth and width of a cut. Reduce the
risk of kickback by making multiple passes
to achieve the desired depth of cut. Failure
to follow these warnings could result in seri-
ous personal injury.
Always use push sticks, featherboards,
push paddles and other safety accessories
whenever possible to increase safety and
control during operations which require
that the blade guard and splitter must be
removed from the saw. ALWAYS replace the
blade guard after dadoing is complete.