Filter
Top Products
G0656 8" Jointer with Built-In Mobile Base
-37-
The fence stops simplify the task of adjusting the
fence to 45˚ inward, 90˚, and 45˚ outward (135˚).
Tools Needed Qty
45° Square ........................................................
1
90° Square ........................................................
1
Sliding Bevel ......................................................
1
Wrench 14mm ...................................................
1
Hex Wrench 3mm ..............................................
1
To set the 45˚ inward fence stop:
1. Using a 45˚ square, adjust the fence to the
45˚ inward position, as shown in
Figure 58.
3. Adjust the 45˚ inward fence stop set screw
until it makes contact with the back of the
fence bracket
.
4. Retighten the jam nut loosened in Step 2.
Figure 59. 45˚ inward fence stop set screw.
Setting Fence Stops
Figure 61. 90˚ swing stop engaged.
To set the 90˚ fence stop:
1. Using a 90˚ square, adjust the fence to the
90˚ position, as shown in
Figure 60.
3. Loosen the jam nut on the 90˚ fence stop bolt
(Figure 61).
4. Adjust the 90˚ fence stop bolt until it makes
contact with the 90˚ swing stop.
5. Retighten the jam nut loosened in Step 3.
Swing Stop
Fence Stop Bolt
Figure 58. Example of adjusting fence 45˚
inward.
2. Loosen the jam nut shown in Figure 59.
2. Flip the 90˚ swing stop into the position
shown in
Figure 61.
Figure 60. Example of adjusting fence to 90˚.
Jam Nut
Fence Stop
Set Screw
Fence
Bracket
Jam Nut