Filter
Top Products
"(+"
<%+,%&+m)%=^\]EgZX^h^dc:KHAVi]Z
Foot Brake
I]^haVi]Z^hZfj^eeZYl^i] V[ddiWgV`ZFigure
52!l]^X] ^h eg^bVg^an^ciZcYZYid WZjhZYVhV
i^bZ hVk^c\ idda# I]Z WZhi bZi]dY [dg jh^c\ i]Z
[ddiWgV`Z^hijgci]Zhe^cYaZaZkZgOFF!i]ZceVg"
i^VaanhiZedci]Z[ddiWgV`Zidhidei]Zhe^cYaZ#
;jaan ejh]^c\ i]Z [ddi WgV`Z l]^aZ i]Z he^cYaZ
^h ON l^aa Xji edlZg id i]Z bdidg VcY Wg^c\ i]Z
he^cYaZ id V hide# Hidee^c\ i]Z he^cYaZ ^c i]^h
bVccZg^h]VgYZgdci]ZaVi]Z\ZVgWdm!WgV`ZeVY!
VcYWZaih#I]^hineZd[WgV`ZVeea^XVi^dch]djaYWZ
gZhZgkZY[dgZbZg\ZcXnh^ijVi^dch#DcXZhideeZY!
i]Zhe^cYaZaZkZgl^aai]ZccZZYidWZgZijgcZYid
i]ZcZjigVaedh^i^dc#
Note:Do not confuse this feature with the emer-
gency stop button. The emergency stop button
cuts power to the machine and does not apply the
brake. This button must be reset to restore power
to the lathe.
Figure 52.;ddiWgV`ZVcYhe^cYaZON/OFF
aZkZg#
;ddi7gV`Z
Adjustable Carriage
Stop System
JhZi]ZVY_jhiVWaZXVgg^V\ZhideFigure 53Xda"
aVgidhZii]ZadXVi^dcl]ZgZi]ZXVgg^V\Zl^aaWZ
Y^hZc\V\ZYWni]Z[ZZYgdY[g^Xi^dcXajiX]#L]Zc
i]Z VY_jhiVWaZ XVgg^V\Z XdciVXih i]Z hide Xda"
aVg Yjg^c\ V adc\^ijY^cVa [ZZY^c\ deZgVi^dc! i]Z
[ZZYgdYXajiX]Y^hZc\V\Zhi]Z[ZZYgdY[gdbi]Z
VegdcVcYi]ZXVgg^V\ZbdkZbZcihideh#
The carriage stop system is designed to
stop the longitudinal carriage movement
at optional locations when the feedrod is
engaged.
When the leadscrew is engaged for thread-
ing operations, the carriage stop system
will not disengage the leadscrew—you must
move the half nut lever instead. Otherwise
the carriage can crash into the chuck, or if
it contacts the stop, the leadscrew shear
pin will break.
Before doing any threading operations,
make sure to loosen the feedrod stop collar
so it slides freely on the feedrod.
NOTICE
Figure 53#6Y_jhiVWaZXVgg^V\ZhideVcYXdaaVg#
6egdcHideHide8daaVg
6egdc
He^cYaZDC$D;;AZkZg