Filter
Top Products
-12-
G0500/G1018/G1018HW 8" Jointers
Unpacking
The Grizzly 8" Jointers are shipped from the man-
ufacturer in a carefully packed crate and a card-
board box. If you discover the machine is dam-
aged after you’ve signed for delivery, and the
truck and driver are gone, you will need to file a
freight claim with the carrier. Save the containers
and all packing materials for possible inspection
by the carrier or its agent. Without the packing
materials, filing a freight claim can be difficult. If
you need assistance determining whether you
need to file a freight claim, or with the procedure
to file one, please contact our Customer Service.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
G0500 Inventory
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
• Jointer Assembly w/Fence ........................1
• Infeed Extension ........................................1
• Outfeed Extension......................................1
• V-Belt M52..................................................2
• Handwheel..................................................2
• Handle ........................................................2
• Dust Port 4" ................................................1
• Hardware Bag #1
—Combo Wrench 8/10MM ........................1
—Combo Wrench 12/14MM ......................1
—Allen Wrench 3MM ................................1
—Allen Wrench 4MM ................................1
—Allen Wrench 5MM ................................1
—Phillips Head Screw
1
⁄4"-20 X
1
⁄2" ............4
—Flat Washer
1
⁄4" ......................................4
—E-Clip ......................................................4
—Jig Feet ..................................................2
—Jig Rod....................................................1
• Hardware Bag #2
—Lock Washers
3
⁄8"....................................3
—Hex Bolt
5
⁄16"-18 x 1" ..............................4
—Flat Washer
5
⁄16"......................................4
—Special Mounting Bolts ..........................3
• Cutterhead Guard ......................................1
• Push Block..................................................2
• Stand Assembly w/Motor............................1
• Stand Door Assembly w/Knob....................1
• Strain Relief................................................1
• Phillips Head Screw #10-24 x 1
1
⁄4" ............2
• Flat Washers #10 ......................................2
• Hex Nuts #10-24 ........................................2
The 8" Jointer is a heavy
machine at approximate-
ly 460 lbs. shipping
weight. DO NOT move
the machine by yourself
– you will need assis-
tance and power equip-
ment. Serious personal
injury may occur if safe
moving methods are not
followed.
SECTION 5: SET UP
Figure 7. G0500 Inventory.