Filter
Top Products
Model G1019Z 14" Bandsaw -15-
Fence
When installing the fence, notice that the front
edge of the table has two threaded holes. These
holes accept the round spacers and socket head
cap screws that attach the fence rail to the table.
1. Secure the fence rail to the table with the
two socket head cap screws and spacers
provided. Ensure that the slot in the rail
lines up with the miter gauge slot in the
table. See Figure 11.
Figure 11. Fence assembly schematic.
2. Mount the fence on the left side of the blade
by setting the fence onto the table and rail.
3. Insert and tighten the fence locking knob to
secure the fence at the desired distance
from the blade.
A
1
⁄2" blade is included with the bandsaw and is
already installed on the machine. Refer to “Blade
Tensioning” and “Blade Tracking” on pages 16
and 17 before starting the machine. Also, the
Operations section contains instructions on
selecting and changing blades.
This concludes the assembly process. Please DO
NOT operate this saw until you have read this
entire manual.
Blades
Do not operate this Bandsaw until you have
completed the adjustments noted in the
next section and have reviewed all safety
information. Serious personal injury may
result.