Filter
Top Products
G1023SL/G1023SLX Left-Tilting 10'' Table Saw -19-
4. If the blade splitter is to the right of the blade
as shown in Figure 20, simply add washers
between the splitter and the front mounting
bracket, and adjust the rear splitter support
as shown in Figure 21.
3. Next, set a straightedge against the face of
the saw blade and the blade splitter as
shown in Figure 19. If the blade splitter is
properly aligned, please skip ahead to the
“Table Insert” instructions; otherwise, contin-
ue with the next step.
Figure 19. Guard in line with blade.
Figure 20. Improper splitter/blade alignment.
The saw blade is extremely sharp. Use extra
care when handling the blade or working
near it. Serious injury is possible.
Figure 21. Proper splitter/blade alignment.
Figure 18. Blade splitter square to table.