Filter
Top Products
-8- G1028/G1029 Dust Collector
Site Considerations
When placing the G1028 or G1029 Dust Collector
in your shop, three major considerations should
be addressed: working clearances, lighting and
electrical, and circuit loading.
1. Working Clearances: Be sure to allow your-
self sufficient room to safely operate your
machines in any foreseeable operation.
Consider existing and anticipated machine
needs, anticipated size of material to be
processed through each machine, and
space for auxiliary stands and/or work
tables. You may also want to consider the
relative position of each machine to one
another for efficient material handling.
2. Outlets: Electrical circuits should be dedi-
cated or large enough to handle motor amp
loads and proper lighting. Outlets should be
located near each machine so power or
extension cords are not obstructing high-traf-
fic areas. Be sure to observe local electrical
codes for proper installation if you are adding
new lighting, outlets, or circuits.