Filter
Top Products
G1036 Slow-Speed Grinder -10-
Figure 6. Oil Feeder check ball.
B. OIL FEEDER
Apply a light machine oil to the oil feeder after
every six hours of operation. Figure 6.
A. GENERAL
Make a habit of inspecting your Slow-Speed
Grinder each time you use it. Check for the fol-
lowing conditions and repair or replace when nec-
essary.
1. Loose bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Any other condition that could hamper the
safe operation of this machine.
IX. MAINTENANCE
To ensure the safest and most satisfactory
work results, it is important that you devel-
op a habit of inspecting your Model G1036
Slow-Speed Grinder each time you use it.
Regular inspection of wheel bearing condi-
tion, wheel condition, electrical cords,
switches, bolt tightness, and other essential
components of fitness will provide your
grinder with the longest possible working
life.
Failure to maintain a regular maintenance
routine could result in machine failure, poor
grinding and sharpening results and possi-
ble operator injury.
DO NOT make inspections or adjustments
while the Slow-Speed Grinder is running.
Ensure that the switch is off, power is dis-
connected and moving parts have stopped
before making adjustments. Failure to do so
could result in serious injury.