Filter
Top Products
G1061/G1061Z Buffing System -11-
SECTION 7: MAINTENANCE
Always be aware of the condition of your buffer.
Routinely check the condition of the following
items and repair or replace as necessary:
• Loose mounting bolts
• Worn switch
• Worn or damaged cord
• Worn or damaged support bearings or guide
bearings
Miscellaneous
Shielded and pre-lubricated ball bearings require
no lubrication for the life of the bearings. All bear-
ings are standard sizes, and replacements can
be purchased from our parts department or a
bearing supply store.
Lubrication
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
!